Rugged-ridge Standard Locking Console, Black Denim, 76-95 Jeep User Manual download pdf (Page 1)

Included Components Quantity

1. Console (1)

2. Mounting Bracket (1)

3. 14 X 1 ¾” Screw (3)

4. 8 X ¾” Screw (6)

Important Information

• Please refer to Section 1 on pages 1-3, for the Jeep CJ-7 and Wrangler

ONLY.

• Please refer to Section 2 on Page 4, for the 1976-83 Jeep CJ-5 ONLY.

Section One – Installation Instructions

1. Position the Console in the desired position between the Driver/Passenger

seats (Figure 1).

2. Position the Mounting Bracket under the rear of the Console with the legs

of the Mounting Brackets level to the floor (Figure 2).

NOTE: The installation of the Mounting Bracket will not be required for the

76-83 CJ-5.

Figure 1 Figure

Required Tools for Installation

1. Electric Drill

2. 1/8” Drill Bit

3. 3/16” Drill Bit

4. Phillips Screw Driver

Padded Console

Installation Instructions

1976-1995 CJ & Wrangler 13101.XX

1 2 3 4 5

Included Components Quantity 1. Console (1) 2. Mounting Bracket (1) 3. 14 X 1 ¾” Screw (3) 4

Page 2

Section One – Installation Instructions continued 3. Adjust the position of the Console front to back and ensure that the shifter clearance for

Page 3

11. Secure Console and Mounting Bracket to the floor of the vehicle using the (4) 8 X ¾” Sheet Metal Screws provided.

Page 4

14. Secure using (1) 14 X 1 ¾” Sheet Metal Screw provided. NOTE: For more support you opt to install (2) Sheet Metal Screws in the front of the c

CAUTION: Take care not to cut or trip any wires/lines that might be in the area. 4. Secure t

No comments

Rugged-ridge Standard Locking Console, Black Denim, 76-95 Jeep User Manual Page 1