Rugged-ridge RRC Off Road Racing Seat, Reclinable, Red, 76-02 J User Manual download pdf (Page 2)

Step (9) With seat installed route the air hose

and air pump under seat and to the

front left or right corner of the seat.

Step(10) Velcro straps have been supplied on

the left and right side of the seat so

that the air pump can be mounted

in relation to what side of the vehicle

the seat has been mounted. For

the drivers side it is recommended

that it be placed on the right side

of the seat (inboard). When attached

to the passenger side it is suggested

to use the left side of the seat. By

locating the air pump to these

spots you will not hi them when

entering or exiting of the vehicle.

Step(11) Air is added to the lower lumbar

support by closing the air valve

screw and pumping the air bladder.

(DO NOT OVER INFLATE).

to release the air and to adjust

for comfort simply unscrew air

valve and bleed out air until the

correct setting is found.

Note: This seat has been supplied with additional restraint slots added to seat. These

slots are designed for the use most racing harnesses but some seat modification

may be needed. It is the users responsibility to follow the seat belt manufactures

installation instructions if installing a seat belt other than an OE design.

The owner is responsible for proper placement of the shoulder harnesses.

Page 2

1 2

No comments

Rugged-ridge RRC Off Road Racing Seat, Reclinable, Red, 76-02 J User Manual Page 2